Technical Infomation > Safety | General Preparation | Substrate Preparation | Texture Coats | Other Information

Safety

• Read the product labels carefully before use.
• MiTex™ Mi-Render must be kept dry during transportation and storage
• Keep containers sealed when not in use to prevent contamination.
• Wear protective clothing to minimise skin contact and wear goggles where splatter is likely. Where an inhalation risk exists, wear a type P1 (Particulate) Respirator
• Where spills occur, scrape material into bins and wipe up with a wet cloth. For MiTex™ Mi-Render, sweep up dry material or soak up liquid spillage with sand or sawdust. Dispose of in accordance with local and environmental authority guidelines.
  
• When working with MiTex™ Mi-Render, observe the usual precautions for handling cement and sand based products. Avoid inhalation of the powder, prolonged skin contact and particularly eye contact. If contact occurs, flush thoroughly with clean water.
  
• Clean up equipment and work area with water.
  
• Do not permit run-off to sewer, storm water or waterways.

Refer to the MSDS for further information – available at www.csr.com.au